Access resources and information regarding the ongoing Covid-19 situation in New Zealand by clicking here.

X

Builders temporary for construction sites

While working on-site, you may need to organise a builders temporary. Electricity can be supplied to a small construction site through a temporary connection.

 

A builder’s temporary provides builders and other tradespeople an electricity supply on-site where there is no existing connection to an electricity network. Only a licensed electrical worker can install, connect, modify or move a builder’s temporary.

What certifications and inspections are required?
Before you can use a builder’s temporary, an electrician must give you

  • A certificate of Compliance (CoC)
  • A Record of Inspection (RoI)
  • An Electrical Safety Certificate (ESC)

These documents guarantee that the builder’s temporary meets New Zealand’s electrical safety standards. The builder’s temporary must be assessed by a qualified electrical worker at least every six months.

Where should a builder’s temporary be located?
A builder’s temporary should be located close to where the electrical work will be carried out. Consider where most of the electrical work on-site will be done and how connections can be made without using too many extension leads  – which can be a potential electrical and trip hazard.

Working with other PCBU’s on-site
PCBU’s and contractors working on the same site must, so far as is reasonably practicable, work together to manage electrical safety risks. Have a discussion about how electricity will be supplied and used in areas where your health and safety duties may overlap. This will help to prevent any gaps in managing health and safety risks. You can read more about this in our blog ‘Overlapping Duties: Working with other businesses’

Keeping you and your team safe at work is a priority, so make sure you are aware of the employer’s requirements of temporary power supplies in the workplace.

The HazardCo App Site Review resource has a list of electrical controls that should be in place to mitigate the risk of electrical hazards.